Preliminary Procedure Remove the rear bumper fascia molding. Refer toRear Bumper Fascia Molding Replacement. | |
1 | Rear Bumper Upper Fascia Screw (Qty:-2) Caution:Refer toFastener Caution. Tighten6-Y(53-lb-in) |
2 | Rear Bumper Upper Fascia ProcedureCarefully push a small nylon wedge between the upper fasciaand the lower fascia. Insert a small flat-bladed tool into thefascia slot and depress the snaps one at a time and pull on thefascia at the same time to gradually remove the lower fascia fromthe upper fascia.Transfer parts as necessary. |
Fuses and Circuit Breakers
The wiring circuits in the vehicle are
protected from short circuits by a
combination of fuses and circuit
breakers. This greatly reduces the
chance of damage caused by
electrical problems.
Danger
Fuses and circuit breakers are
marked with their ampere rating.
Do not exceed the ...