Preliminary ProceduresRemove the rear bumper fascia. Refer toRear Bumper Fascia Replacement.Remove the rear bumper fascia molding. Refer toRear Bumper Fascia Molding Replacement. | |
1 | Rear Bumper Lower Fascia Screw (Qty:-2) Caution:Refer toFastener Caution. Tighten6-Y(53-lb-in) |
2 | Rear Bumper Lower Fascia ProcedureCarefully push a small nylon wedge between the upper fasciaand the lower fascia. Insert a small flat-bladed tool into thefascia slot and depress the snaps one at a time and pull on thefascia at the same time to gradually remove the lower fascia fromthe upper fascia.Transfer part as necessary. |
Introduction
The names, logos, emblems, slogans, vehicle model names, andvehicle body designs appearing in this manual including, but notlimited to, GM, the GM logo, CHEVROLET, the CHEVROLET Emblem, andEQUINOX are trademarks and/or service marks of General Motors LLC,its subsidiaries, affiliates, or licensors.Th ...