Preliminary Procedure Remove the rear bumper fascia molding. Refer toRear Bumper Fascia Molding Replacement. | |
1 | Rear Bumper Lower Fascia Screw (Qty:-2) Caution:Refer toFastener Caution. Tighten6-Y(53-lb-in) |
2 | Rear Bumper Lower Fascia ProcedureCarefully push a small nylon wedge between the upper fasciaand the lower fascia. Insert a small flat-bladed tool into thefascia slot and depress the snaps one at a time and pull on thefascia at the same time to gradually remove the lower fascia fromthe upper fascia.Transfer parts as necessary. |
Tire and Wheel Balancing (Wheel Pilot Bore Greasing) Wheels
Beginning with MY 2011 vehicle, pilot bore grease should be applied.To enable this, grease must be applied to the pilot bore to prevent the wheel fromseizing onto the hub.Refer toAdhesives, Fluids, Lubricants, and Sealersfor pilot bore lubricant part number.Do not use any penetrating oils, grease or ...