Chevrolet Equinox Service Manual: Rear Bumper Fascia Molding Replacement Bumpers Rear Bumper
Preliminary Procedure Remove the rear bumper energy absorber. Refer toRear Bumper Energy Absorber Replacement. | |
1 | Rear Bumper Fascia Molding Procedure Carefully push a small nylon wedge between the rear fasciaand the fascia molding. Insert a small flat-bladed tool into thefascia slot and depress the tabs one at a time and pull on thefascia at the same time to gradually remove the fascia molding fromthe rear fascia. |
Rear Bumper Fascia Bumper Guard Pad Replacement (Terrain) Bumpers Rear Bumper
Rear Bumper Fascia Bumper Guard Pad ReplacementCalloutComponent NamePreliminary ProcedureRemove the rear fascia. Refer toRear Bumper Fascia Replacement.1Rear Bumper Fascia Bumper Guard PadProcedureDep ...
Rear Bumper Fascia Molding Replacement (Terrain) Bumpers Rear Bumper
Rear Bumper Fascia Molding ReplacementCalloutComponent NamePreliminary ProcedureRemove the rear bumper energy absorber. Refer toRear Bumper Energy Absorber Replacement.1Rear Bumper Fascia MoldingProce ...
Other materials:
Engine Coolant Thermostat Replacement (LEA) Engine Cooling Thermostat
Engine Coolant Thermostat ReplacementCalloutComponent NamePreliminary ProceduresRaise the vehicle by its full height. Refer toLifting and Jacking the Vehicle.Draining the cooling system. Refer toCooling System Draining and Filling.Disconnect the engine coolant outlet hose and the radiator surge tank ...
