i!\-
Procedure Remove the rear bumper energy absorber. Refer toRear Bumper Energy Absorber Replacement. | |
1 | Rear Bumper Fascia Bumper Guard Pad Procedure Carefully push a small thin nylon wedge between the fasciaand the fascia bumper guard. Insert a small flat-bladed tool intothe fascia slot and depress the snaps one at a time and pull on thefascia step pad at the same time to gradually remove the fasciabumper guard from the fascia. |
Body Waterleak Repair
Warning:If the vehicle interior is exposed to moisture and becomessoaked up to the level of the sensing and diagnostic module (SDM),the SDM and SDM harness connector must be replaced. The SDM couldbe activated when powered, which could cause airbag deployment andresult in personal injury.Depending o ...