Chevrolet Equinox Service Manual: Range Selector Lever Cable Adjustment Automatic Transmission Unit
Note:Adjust the automatic transmission range selector cable whilethe transmission and the gear selector are in the Park positiononly. Failure to do so may cause mis-adjustment.
Set the park brake and chock the wheels.Verify the transmission range select lever is in the parkposition.Verify the transmission manual shift lever is in the parkposition.
Pull the retaining collar-(1) forward, thenrelease the range select cable adjuster clip-(2).
Slide the two halves-(1, 2) of the range selectcable together until all free play is removed.
Depress the adjuster clip-(1) locking the adjusterclip completely, then release the retaining collar.Pull both halves of the range select cable in oppositedirections to verify the cable adjuster is secured.Check the transmission range select lever in all gearselections for proper operation.
Manual Shift Shaft Seal Replacement Automatic Transmission Unit
Manual Shift Shaft Seal ReplacementCalloutComponent Name1Manual Shift Shaft SealSpecial ToolsDT-45201Cooler Line Seal RemoverDT-46626Seal InstallerFor equivalent regional tools, refer toSpecial Tools. ...
Bushing and Mating Shaft Inspection Automatic Transmission Unit
Note:Proper bushing and corresponding mating shaft inspectionshould be performed before replacing the bushing, shaft, and insome cases, the component which houses the bushing. Thoroughlyclean and dry ...
Other materials:
Drive Range, Sixth Gear Automatic Transmission Unit
As the vehicle speed increases, the transmission control module-(TCM) receives inputsignals from the automatic transmission input and output speed sensors, the throttleposition sensor and other vehicle sensors to determine the precise moment to commandON the normally-low 26-pressure control solenoid ...
