Preliminary ProcedureRemove the instrument insulator panel. Refer toInstrument Panel Insulator Panel Replacement - Left SideRemove the driver knee bolster reinforcement. Refer toDriver Knee Bolster Reinforcement Replacement | |
1 | Amplifier Bracket Push On Nuts (Qty:-3) |
2 | Radio Speaker Amplifier Bolts (Qty:-3) Caution:Refer toFastener Caution. Tighten2.5-Y(22-lb-in) |
3 | Radio Speaker Amplifier Procedure Disconnect the electrical connectors. |
Valve Lifter Removal - Right Side
Important:Do not stroke/cycle the stationary hydraulic lash adjusterplunger without oil in the lower pressure chamber.Do not allow the stationary hydraulic lash adjuster to tipover, plunger down, after the oil fill.Remove the valve lifters (SHLAs) from the cylinder head. Ifthe lifters are to be reus ...