Chevrolet Equinox manuals

Chevrolet Equinox Service Manual: Radiator Outlet Hose Replacement (LFX) Engine Cooling Radiator

Chevrolet Equinox Service Manual / Powertrain / Engine / Radiator Outlet Hose Replacement (LFX) Engine Cooling Radiator

Special Tools

J 38185 Hose Clamp Pliers

Removal ProcedureRemove the intake manifold cover. Refer toIntake Manifold Cover Replacement.Drain the cooling system. Refer toCooling System Draining and Filling.

Radiator Outlet Hose Replacement (LFX) Engine Cooling Radiator

Disengage tension on the radiator outlet hose clamp-(1) at the thermostat housingusing J 38185 Hose Clamp Pliers.Remove the radiator outlet hose-(2) from the thermostat housing.Raise and support the vehicle. Refer toLifting and Jacking the Vehicle.

Radiator Outlet Hose Replacement (LFX) Engine Cooling Radiator

Disengage tension on the radiator outlet hose clamp-(1) at the radiator using J 38185 Hose Clamp Pliers.Remove the radiator outlet hose-(2) from the radiator.Remove the radiator outlet hose from the vehicle.Installation ProcedurePosition the radiator outlet hose to the vehicle.

Radiator Outlet Hose Replacement (LFX) Engine Cooling Radiator

Install the radiator outlet hose-(2) to radiator.Engage tension on the radiator outlet hose clamp-(1) at the using J 38185 Hose Clamp Pliers.Lower the vehicle.

Radiator Outlet Hose Replacement (LFX) Engine Cooling Radiator

Note:Lubricate the inside diameters of the hose with clean coolant prior to installation.

Install the radiator outlet hose-(2) to the radiator.Engage tension on the radiator outlet hose clamp-(1) at the thermostat housing usingJ 38185 Hose Clamp Pliers.Fill the cooling system. Refer toCooling System Draining and Filling.Install the intake manifold cover. Refer toIntake Manifold Cover Replacement.
Radiator Inlet Hose Replacement (LFX) Engine Cooling Radiator
Special Tools J 38185 Hose Clamp PliersRemoval ProcedureDrain the cooling system. Refer toCooling System Draining and Filling.Remove the intake manifold cover. Refer toIntake Manifold Cover Replacemen ...

Cylinder Head Replacement Engine Block Cylinder Head
Special ToolsJ 45059 Angle MeterEN-48953 Camshaft Actuator Locking ToolJ 38185 Hose Clamp PliersEN-48749 Timing Chain Retention Tool KitRemoval ProcedureDrain the cooling system. Refer toCooling Syste ...

Other materials:

Shock Absorber Disposal Strut Assembly Dampers/Shocks
Warning:Gas charged shock absorbers contain high pressure gas. Do notremove the snap ring from inside the top of the tube. If the snapring is removed, the contents of the shock absorber will come outwith extreme force which may result in personal injury.Warning:To prevent personal injury, wear safet ...

© 2017-2024 Copyright www.cequinox.com