Special Tools
J 38185 Hose Clamp Pliers
Removal ProcedureDrain the cooling system. Refer toCooling System Draining and Filling.Remove the intake manifold cover. Refer toIntake Manifold Cover Replacement.Disengage tension on the radiator inlet hose clamp-(1) at the radiator using J 38185 Hose Clamp Pliers.Remove the radiator inlet hose-(2) from the radiator.Disengage tension on the radiator inlet hose clamp-(3) at the engine using J 38185 Hose Clamp Pliers.Remove the radiator inlet hose-(2) from the engine.Remove the radiator inlet hose from the vehicle.Installation ProcedurePosition the radiator inlet hose to the vehicle.
Note:Lubricate the inside diameters of the hose with clean coolant prior to installation.
Install the radiator inlet hose-(2) to the engine.Engage tension on the radiator inlet hose clamp-(3) at the engine using J 38185 Hose Clamp Pliers.Install the radiator inlet hose-(2) to the radiator.Engage tension on the radiator inlet hose clamp-(1) at the radiator using J 38185 Hose Clamp Pliers.Install the intake manifold cover. Refer toIntake Manifold Cover Replacement.Fill the cooling system. Refer toCooling System Draining and Filling.Heated Oxygen Sensor Replacement - Sensor 2 Engine Control Engine Control Sensors O2 Sensors
Heated Oxygen Sensor Replacement - Sensor 2CalloutComponent NamePreliminary ProcedureRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.1Heated Oxygen SensorCaution:Do not remove the pigtail from either the heated oxygensensor (HO2S) or the oxygen sensor (O2S). Removing the pigta ...