Chevrolet Equinox Service Manual: Propeller Shaft Runout Specifications Driveshafts Propeller Shaft Assembly
1 Piece Propeller Shaft – Guideline | 1.17-mm | 0.046-in | 1.27-mm | 0.050-in | 1.40-mm | 0.055-in | — | — |
1 Piece Aluminum Graphite Propeller Shaft –Guideline | 1.17-mm | 0.046-in | — | — | 1.40-mm | 0.055-in | — | — |
2 Piece System Front Propeller Shaft with Slip Yoke– Guideline | 0.76-mm | 0.030-in | 0.76-mm | 0.030-in | 0.71-mm | 0.028-in | — | — |
2 Piece System Front Propeller Shaft with Stub Shaft– Guideline | 0.76-mm | 0.030-in | 0.76-mm | 0.030-in | — | — | 0.13-mm | 0.005-in |
2 Piece System Rear Propeller Shaft with Slip Yoke– Guideline | 0.71-mm | 0.028-in | 0.76-mm | 0.030-in | 0.89-mm | 0.035-in | — | — |
2 Piece System Rear Propeller Shaft with Stub Shaft– Guideline | — | — | 0.76-mm | 0.030-in | 0.89-mm | 0.035-in | 0.13-mm | 0.005-in |
These guidelines apply only to propeller systems with 2 or 3U-joints. | ||||||||
Propeller Shaft Phasing Correction Driveshafts Propeller Shaft Assembly
One Piece Propeller Shaft Phasing CorrectionAn out of phase single-piece propeller shaft is very unusual.If the phasing inspection procedure revealed that prop shaft is notphased correctly, the welded ...
Rear Axle Lubricant Level Inspection Axles Rear
Rear Axle Lubricant Level InspectionCalloutComponent NamePreliminary ProcedureRaise the vehicle. Refer toLifting and Jacking the Vehicle.1Rear Differential Fill PlugCaution:Refer toFastener Caution.Ti ...
Other materials:
Rear Bumper Upper Fascia Replacement (Terrain) Bumpers Rear Bumper
Rear Bumper Upper Fascia ReplacementCalloutComponent NamePreliminary ProceduresRemove the rear bumper fascia. Refer toRear Bumper Fascia Replacement.Remove the rear bumper fascia molding. Refer toRear Bumper Fascia Molding Replacement.1Rear Bumper Upper Fascia Screw (Qty:-2)Caution:Refer toFastener ...
