Caution:The pipe wrench must be placed at the valve end of thesteering gear and positioned up against the inner tie rod housing.Placing the pipe wrench in any other location will cause damage tothe steering gear.
Compressor Hose Clearance to the Exhaust Gas Circulation Pipe Caution
Fastener CautionEngine Block Disassemble Engine Block
Remove the engine front cover studs-(1).Remove the block heater cartridge, if equipped.Remove the right knock sensor bolt.Remove the right knock sensor.Remove the left knock sensor bolt.Remove the left knock sensor.Remove the crankshaft position sensor bolt.Remove the crankshaft position sensor.Remo ...