Preliminary Procedures Clean and Inspect the carrier as an assembly. If wear ordamage is found disassemble to replace the affectedcomponent. | |
1 | Reaction Internal Gear Retaining Ring |
2 | Reaction Carrier Internal Gear |
3 | Output Carrier Assembly |
2-6 Clutch Plate Installation Automatic Transmission Unit
2-6 Clutch Plate InstallationCalloutComponent Name12–6 Clutch Backing PlateNote:The tab on the clutch plate faces the bottom of the case.22–6 Clutch (w/Friction Material) Plate Assembly-(Qty: 3)32–6 Clutch Plate (Qty: 3)Note:The tab on the clutch plate faces the bottom of the case.42–6 Clutc ...