Chevrolet Equinox Service Manual: Oil Pump Assemble Engine Lubrication Oil Pump
Lubricate all oil pump parts with engine oil.Install the inner gear-(2) into the outergear-(3).
Note:If gears are improperly installed in the front cover, thegerotor cover will not bolt on.
Install the gears together into the frontcover-(4) with the hub of the center gear facing thefront cover.Caution:Refer toFastener Caution.
Install the oil pump gerotor cover-(1) and boltsand tighten to6-Y(53-lb-in).
Install the pressure relief valveplunger-(3).Install the pressure relief valvespring-(2).Install and tighten the pressure relief valveplug-(1) to40-Y(30-lb-ft).
Camshaft Cover Disassemble Valvetrain Camshaft
Left Camshaft CoverRemove and discard the left camshaft cover boltgrommets.Remove the fuel injector sight shield ballstud.Remove the oil fill cap.Note:Do not reuse the camshaft cover gasket and spark ...
Oil Level Indicator and Tube Installation (LAF, LEA, or LUK) Engine Lubrication Oil Level Indicator Tube
Lubricate the oil level indicator tube O-ring.Refer toAdhesives, Fluids, Lubricants, and Sealers.Install the oil level indicator-(2) and the oillevel indicator tube-(1) into the oil pan.Caution:Refer ...
Other materials:
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection Automatic Transmission Unit
Removal ProcedureImportant:Perform the following procedure when removing the retainingrings and cooler lines from the quick connect fittings located onthe radiator and/or the transmission.Pull the plastic cap back from the quick connect fitting anddown along the cooler line about 5-cm(2-in).Using a ...