Chevrolet Equinox Service Manual: Oil Level Indicator and Tube Installation (LAF, LEA, or LUK) Engine Lubrication Oil Level Indicator Tube

Chevrolet Equinox Service Manual / Powertrain / Engine / Oil Level Indicator and Tube Installation (LAF, LEA, or LUK) Engine Lubrication Oil Level Indicator Tube

Oil Level Indicator and Tube Installation (LAF, LEA, or LUK) Engine Lubrication Oil Level Indicator Tube

Lubricate the oil level indicator tube O-ring.Refer toAdhesives, Fluids, Lubricants, and Sealers.Install the oil level indicator-(2) and the oillevel indicator tube-(1) into the oil pan.

Caution:Refer toFastener Caution.

Install the oil level indicator tube bracketbolt-(3) to the intake manifold and tighten to10-Y-(89-lb-in).Install the electrical wiring harness to the oil levelindicator tube.Install the knock sensor wiring clip-(4) into theoil level indicator tube.

Oil Pump Assemble Engine Lubrication Oil Pump

Lubricate all oil pump parts with engine oil.Install the inner gear-(2) into the outergear-(3).Note:If gears are improperly installed in the front cover, thegerotor cover will not bolt on.Install the ...

Engine Mount Inspection Engine Block Engine Mounts

Note:Before replacing any engine mount due to suspected fluidloss, verify that the source of the fluid is the engine mount, notthe engine or accessories.Install the engine support fixture. Refer toEng ...

Other materials:

Wheel Alignment Specifications Wheels
Alignment Condition: Full tank of fuel, no passengers and placed on flat level surface.Wheel Alignment SpecificationsRPO RestrictionWheelsCaster±-0.8°Cross Caster±-0.8°Camber±-0.8°Cross Camber±-0.8°Total Toe±-0.2°Steering Wheel Angle±-3.5°Thrust Angle±-0.3°LeftRight(Left − Right)Left ...