Chevrolet Equinox Service Manual: Noise While Driver Adjusting Column Steering Wheel and Column

Chevrolet Equinox Service Manual / Chassis / Steering / Noise While Driver Adjusting Column Steering Wheel and Column

Noise While Driver Adjusting Column

Condition

Action

Interference occurs in the column assembly pivot path.	Inspect the column jacket for wear patterns. Ensure that themounting and the pivot bolts are properly installed and that thecolumn is properly aligned in the vehicle.
The tilt lever assembly is damaged.	Replace the steering column. Refer toSteering Column Replacement.

Power Steering System Description and Operation (Electronic Power Steering) Hydraulic Steering

K43Power Steering Control ModuleK17Electronic Brake Control ModuleP16Instrument ClusterB137Power Steering Shaft Torque SensorM38Power Steering MotorThe power steering system consists of the following ...

Power Steering System Flushing Hydraulic Steering

Note:Do not reuse any drained power steering fluid regardless ofappearance or condition.Raise the vehicle until the front wheels are off the ground.Refer toLifting and Jacking the Vehicle.Place a larg ...

Other materials:

Front Wheel Drive Intermediate Shaft Replacement Engine Block Cylinder Block Crankshaft
Special ToolsJ-2619–01Slide HammerJ-44467Output Shaft Assembly Remover andInstallerRemoval ProcedureRaise and support the vehicle. Refer toLifting and Jacking the VehicleRemove the wheel drive shaft assembly. Refer toFront Wheel Drive Shaft Replacement.Note:Remove the retaining ring. DO NOT re-use ...