Chevrolet Equinox Owners Manual: Memory Features
If equipped, memory seats allow two drivers to store and recall their unique seat positions for driving the vehicle, and a shared exit position for getting out of the vehicle. Other feature positions may also be set, such as power mirrors and power steering wheel, if equipped. Memory positions are linked to RKE transmitter 1 or 2 for automatic memory recalls.
Before storing, adjust all available memory feature positions. Turn the ignition on and then press and release SET; a beep will sound.
Then immediately press and hold 1,
2, or
(Exit) on the driver door
until two beeps sound. To manually
recall these positions, press and
hold 1, 2, or
until the saved
position is reached. See Memory
Seats.
Lumbar Adjustment
If equipped, press and hold the front
or rear of the control to increase or
decrease lumbar support.
See Lumbar Adjustment. ...
Heated and Ventilated Seats
If available, the buttons are on the
climate control panel. To operate,
the engine must be running.
To heat the driver or passenger seat
cushion and seatback, press or
. Indicator lights o ...
Other materials:
Valve Lifter Installation - Left Side
Note:Do not stroke/cycle the stationary hydraulic lash adjusterplunger without oil in the lower pressure chamber.Note:Do not allow the stationary hydraulic lash adjuster to tipover, plunger down, after the oil fill.Fill the stationary hydraulic lash adjuster (SHLA) with cleanengine oil. Refer toAdhe ...
