Table 1: | Manual Shaft Detent (w/Shift Position Switch) Lever Assembly Removal |
Table 2: | Park Pawl Actuator Guide Removal |
1 | Manual Shaft Detent Lever Hub Pin Note:Use side cutter to remove the pin-(1) and discard. |
2 | Manual Shift Shaft Pin Note:Discard the pin. It is not reusable. Special ToolsDT-23129 Universal Seal RemoverGE-6125-1B Slide HammerFor equivalent regional tools, refer toSpecial Tools. |
3 | Manual Shaft |
4 | Manual Shaft Detent (w/Shift Position Switch) Lever Assembly |
5 | Park Pawl Actuator Assembly |
1 | Park Pawl Actuator Guide Pin Note:Use side cutter to remove the pin-(1) and discard. |
2 | Park Pawl Actuator Guide Assembly |
3 | Park Pawl Actuator Guide Assembly Seal Note:Discard the seal. It is not reusable. |
Front Wheel Drive Shaft Replacement Wheels
Special ToolsJ-2619-01 Slide HammerJ-42129 Hub PullerJ-45341 Rear Wheel Drive Shaft Removal ToolsFor regional equivalent tools, refer toSpecial Tools.Removal ProcedureRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.Remove the tire and wheel assembly. Refer toTire and Wheel Rem ...