Chevrolet Equinox Service Manual: Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal Automatic Transmission Unit
1 | Park Pawl Actuator Bracket Bolt-M6-x-25 (Qty: 2) |
2 | Park Pawl Actuator Bracket |
3 | Park Pawl Shaft |
4 | Park Pawl |
5 | Park Pawl Spring |
6 | Park Pawl Actuator Guide Pin |
7 | Park Pawl Actuator Guide |
8 | Manual Shift Detent Lever Pin Note: Use a small nail puller or other suitable tool.Discard the pin. The pin is not reusable.Special ToolsDT-23129 Universal Seal RemoverGE-6125-1B Slide Hammer with AdapterFor equivalent regional tools, refer toSpecial Tools. |
9 | Manual Shaft Detent (w/Shift Position Switch) Lever Assembly Note:Rotate the assembly counterclockwise so the actuator rod will fit through the caseopening. |
10 | Park Pawl Actuator Assembly |
Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Installation Automatic Transmission Unit
Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl ActuatorInstallationCalloutComponent Name1Park Pawl Actuator Guide2Park Pawl Actuator Guide Pin3Park Pawl4Park Pawl Shaft5Pa ...
Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement Automatic Transmission Unit
/.Manual Shift Detent Lever with Shaft Position Switch Assembly ReplacementCalloutComponent NamePreliminary ProceduresRemove the transmission range selector lever. Refer toAutomatic Transmission Range ...
Other materials:
Remote Keyless Entry (RKE)
System
The Remote Keyless Entry (RKE)
transmitter may work up to
60m(197 ft) away from the vehicle.
With Remote Start and Power Liftgate Shown
Press the button on the side to
remove the key. The key can be
used for all locks.
: Press to unlock the driver door
or all doors depending on vehicl ...
