Caution:After cleaning the transmission components, allow to air dry.Do not use cloth or paper towels in order to dry any transmissioncomponents. Lint from the towels can cause componentfailure. Caution:Do not reuse cleaning solvents. Previously used solvents maydeposit sediment which may damage the component. Preliminary ProceduresThoroughly clean the housing with clean solvent.Inspect the piston bores and retainer ring grooves for wear,damage or porosity. | |
1 | 1–2–3–4 Clutch Spring RetainerGroove |
2 | 1–2–3–4 Clutch PistonBore |
3 | Low and Reverse Clutch Spring Retainer Groove |
4 | Low and Reverse Clutch Piston Bore |
5 | Clutch Oil Passages |
6 | Air Bleed Passages |
Tire Pressure Light
For vehicles with the Tire Pressure
Monitor System (TPMS), this light
comes on briefly when the engine is
started. It provides information
about tire pressures and the TPMS.
When the Light Is On Steady
This indicates that one or more of
the tires are significantly
underinflated.
A Dri ...