Chevrolet Equinox Service Manual: Low and Reverse and 1-2-3-4 Clutch Housing Assemble Automatic Transmission Unit Automatic Clutches
| Table 1: | 1-2-3-4 Clutch Piston Installation |
| Table 2: | Low and Reverse Clutch Piston Installation |
1 | 1-2-3-4 Clutch Piston Note:DT-47798 protector prevents the piston seal lip from damage during installation. Apply a thin coat ofATF to the ID of DT-47798 protector to ease the installation of the piston. Special Tools DT-47798 Seal Protector |
2 | 1-2-3-4 Clutch Spring |
3 | 1-2-3-4 Clutch Spring Retainer Caution:Regulate the air pressure to 276-kPa(40-psi) maximum. High pressure could cause the pistonto over travel and damage the piston seals. ProcedurePlace the retainer onto DT-47799-1 which is part of DT-47799 compressor. Compressing the spring using DT-47799-2 which is part of DT-47799 compressor, will install the retainer into the retainer groove.Apply shop air to the clutch fluid feed hole in the clutch housing to verify properpiston operation.Special Tools DT-47799 Clutch Piston Spring Compressor |
1 | Low and Reverse Clutch Piston Note:DT-47807 protector prevents the piston seal lip from damage during installation. Apply a thin coat ofATF to the ID of DT-47807 protector to ease the installation of the piston. Special Tools DT-47807 Clutch Piston Seal Protector |
2 | Low and Reverse Clutch Spring |
3 | Low and Reverse Clutch Spring Retainer Caution:Regulate the air pressure to 276-kPa(40-psi) maximum. High pressure could cause the pistonto over travel and damage the piston seals. ProcedurePlace the retainer onto DT-47794-1 which is part of DT-47794 compressor. Compressing the spring using DT-47794-2 which is part of DT-47794 compressor, will install the retainer into the retainer groove.Apply shop air to the clutch fluid feed hole in the clutch housing to verify properpiston operation.Special Tools DT-47794 Spring Compressor |
#09-07-30-018D: Warranty Administration - Change in Automatic Transmission Add Condition Documentation and Claim Submission - (May 10, 2013) Automatic
Subject:Warranty Administration – Change in Automatic Transmission Add Condition Documentationand Claim SubmissionModels: 2014 and Prior GM Passenger Cars and TrucksAttention: This bulletin applie ...
3-5-Reverse and 4-5-6 Clutch Housing Assemble Automatic Transmission Unit
Table 1: 4-5-6 Clutch Piston InstallationTable 2: 4–5–6 Clutch Dam InstallationTable 3: 4-5-6 Clutch Plates InstallationTable 4: 3-5 Reverse Clutch Plates InstallationTable 5: Piston and Reluctor ...
Other materials:
Dimensions - Body
DescriptionPoint-to-Point Measurements are for reference only. Allmeasurements are given in millimeters. Use these measurements fordiagnosis and estimating. Point-to-Point measurements areduplicated with tram bar pointers set at equal lengths. All diemarks, holes, slots and fasteners are measured to ...
