Preliminary Procedure Remove the liftgate upper trim finish panel. Refer toLiftgate Upper Trim Finish Panel Replacement. | |
1 | Liftgate Trim Finish Panel Bolt Cap |
2 | Liftgate Lower Trim Finish Panel Fastener Caution:Refer toFastener Caution. Tighten:2-Y-(18-lb-in) |
3 | Liftgate Lower Trim Finish Panel Assembly ProcedureUse a trim panel removal tool to aid in the removal of thetrim panel from the liftgate assembly.Start at the top clip on the right-hand side of liftgatelower trim finish panel.Disconnect the electrical connector, if equipped. |
Transmission Replacement (FWD) Automatic Transmission Unit
Removal ProcedureRemove the battery tray. Refer toBattery Tray Replacement.Remove the transmission range select lever cable and bracket.Drain the transmission fluid. Refer toTransmission Fluid Drain and Fill.Remove the wire harness retainer-(2) from the control valve body cover stud.Disconnect the c ...