Chevrolet Equinox Service Manual: Lift Plate and Holding Fixture Installation Automatic Transmission Unit
1 | DT-47811-ATransmission Lift Plate Warning:Handle with care, the transmission assembly weighs over83-Kg (183-lbs). Bodily injury could occur ifnot handled properly. Caution:Refer toFastener Caution. Procedure Tighten bolts and nut. Tighten12-Y(106-lb-in) Special Tools DT-47811-ATransmission Lift Plate For equivalent regional tools, refer toSpecial Tools. |
2 | DT-46625Transmission Holding Fixture ProcedureRaise the transmission with an overhead hoist.Adjust mounting block on fixture to match bosses on case,then tighten bolts.Tighten13-Y(10-lb-ft) Special Tools DT-46625-10Holding Fixture Adapter For equivalent regional tools, refer toSpecial Tools. |
Internal Components Removal Automatic Transmission Unit
Internal Components RemovalCalloutComponent Name11–2–3–4 Clutch Backing Plate Retainer RingWarning:The retainer is under tension. Use care when removing orinstalling the retainer. Personal injur ...
Lift Plate and Holding Fixture Installation Automatic Transmission Unit
Lift Plate and Holding Fixture InstallationCalloutComponent Name1 DT-47811-A Transmission Lift PlateWarning:Handle with care, the transmission assembly weighs over90.7-kg (200-lbs). Bodily injury coul ...
Other materials:
Low and Reverse and 1-2-3-4 Clutch Housing, and 1-2-3-4 Clutch Plate Installation (6T40/45/50) Automatic Transmission Unit Automatic Clutches
Low and Reverse and 1-2-3-4 Clutch Housing, and 1-2-3-4 Clutch Plate InstallationCalloutComponent Name1Low and Reverse and 1–2–3–4 Clutch HousingNote:The longer legs face the bottom of the case and the oil passages face the valve bodyend of the case.2Output Sun Gear Assembly31–2–3–4 Clut ...
