i..\
Preliminary ProceduresIf equipped with AWD, remove the right side catalytic converter. Refer toCatalytic Converter Replacement - Right Side.Raise and support the vehicle. Refer toLifting and Jacking the Vehicle. | |
1 | Bolt Caution:Refer toFastener Caution. Tighten10-Y (89-lb-in) |
2 | Bolt Tighten58-Y (42-lb-ft) |
3 | Exhaust Manifold Lower Heat Shield |
4 | Bolt Tighten25-Y (18-lb-ft) |
5 | Knock Sensor Procedure Disconnect the electrical connector. |
Transfer Case Assemble Automatic Transmission Unit
Table 1: Intermediate Drive Shaft AssemblyTable 2: Rear Output Shaft Housing AssemblyTable 3: Output Flange InstallationTable 4: Right Transfer Case, Input Shaft, and Output Drive ShaftInstallationTable 5: Rear Output Shaft Housing InstallationTable 6: Intermediate Drive Shaft InstallationTable 7: H ...