1 | Instrument Panel Upper Center Trim Panel Assembly ProcedureApply firm inward pressure at the top center of the radiocontrol assembly, while at the same time applying upward pressureon the instrument panel upper center trim panel, releasing theretainer tab secure the upper center trim panel to the radiocontrol assembly.Continue applying upward pressure and use a flat bladedplastic trim tool in order to release the retainer clips securingthe instrument panel center trim panel to the instrument panelassembly |
Lift Plate and Holding Fixture Removal Automatic Transmission Unit
Lift Plate and Holding Fixture RemovalCalloutComponent Name1 DT-46625 Transmission Holding FixtureNote:Raise the transmission in order to remove the holding fixture.For equivalent regional tools, refer toSpecial Tools.2 DT-47811-A Lift PlateNote:Lower the transmission assembly onto the transmission ...