Preliminary Procedure Remove the drivers knee bolster panel. Refer toDriver Knee Bolster Panel Replacement. | |
1 | Instrument Panel Insulator Panel Fastener Caution:Refer toFastener Caution. Tighten2.5-Y(22-lb-in) |
2 | Left Front Floor Lower Console Side Finish Cover Push PinRetainer |
3 | Instrument Panel Insulator Panel Push-in Retainer Procedure Pull the front edge of the left front floor lower consoleside finish cover outward enough to access the instrument panelinsulator push-in retainer. |
4 | Instrument Panel Insulator Panel Assembly ProceduresDisconnect the electrical connections, if applicable.When replacing the instrument panel insulator panel assembly,transfer all necessary components.When reinstalling the insulator panel, ensure the rear tabaligns with the stud on the cowl panel. |
Brake Pedal Position Sensor Replacement Hydraulic Brakes Brake Pedal Assembly
Brake Pedal Position Sensor ReplacementCalloutComponent NamePreliminary ProcedureRemove the instrument panel insulator panel left side. RefertoInstrument Panel Insulator Panel Replacement - Left Side.Remove the communication interface module. Refer toCommunication Interface Module Replacement1Brake ...