Refer to the appropriate diagnostic procedure below for the vehicle being serviced.
Inspection/Maintenance System Check– 2.2L or 2.4L engineInspection/Maintenance System Check– 2.8L, 3.0L, 3.2L, or 3.6L engine
Lifting and Jacking the Vehicle
Center Pillar Outer Panel Reinforcement ReplacementRear Object Sensor Housing Replacement
Removal ProcedureThe housings are adhesively retained to the backside of thefascia and must be removed prior to paint refinish operations everytime the fascia is refinished due to paint bridging concerns.Adhesive tape cannot be removed and re-used with retentionconfidence. Thus the rear object senso ...