Chevrolet Equinox Service Manual: Inspection/Maintenance (I/M) System DTC Table Engine Control
If an I/M System Status indicator did NOT update to YES during theInspection/Maintenance Complete System Set Procedure, review each indicator and reference this table to determine each DTC associatedwith the I/M System Status Indicator. Each DTC listed below has specific conditionsthat must be met for the diagnostic to run. Included within the conditions are additionalDTCs, which if set, may inhibit the DTCs listed below from running. Reviewingand operating the vehicle within the Conditions for Running for each DTC listed belowwill allow the I/M System Status Indicators to transition to YES. | |
Catalyst | DTC P0420 or P0430 |
EGR/CMP | DTC P05CC-P05CF |
EVAP | DTC P0442DTC P0446DTC P0455 |
Fuel System | DTC P219A or P219B |
Oxygen Sensor | DTC P0133, P013A-P013F, P014A, P014B, P0153, P015A-P015D, or P2270-P2273 |
Oxygen Sensor Heater | DTC P0030-P0032, P0036-P0038, P0050-P0054, P0056-P0060, P0135, P0141, P0155, or P0161 |
Camshaft System | DTC P0011, P0014, P0021, or P0024 |
Special Tools (Diagnostic Tools) Engine Control
IllustrationTool Number/DescriptionCH-34730-2CJ-34730-2CInjector Test LampCH-38641-BJ-38641-BDiesel Fuel Quality TesterCH-39021-301J-39021-301Fuel Injector Harness AdapterCH-39021-460J-39021-460Fuel I ...
Knock Sensor Replacement - Bank 2 Engine Control Engine Control Sensors Knock Sensor
Knock Sensor Replacement - Bank 2CalloutComponent NamePreliminary ProcedureRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.1Knock Sensor FastenerCaution:Refer toFastener Caution ...
Other materials:
Intake Manifold Removal Intake and Forced Induction Intake Manifold
Disconnect and remove the positive crankcaseventilation-(PCV) tube-(1) from the intakemanifold and right camshaft cover.Remove the evaporative-(EVAP) hose from the intakemanifold and EVAP solenoid.Remove the fuel pump cover bolt-(1).Remove the fuel pump cover-(2).Remove the intake manifold bolts-(1) ...
