Chevrolet Equinox Service Manual: Input Shaft Seal Replacement - Right Automatic Transmission Unit

Chevrolet Equinox Service Manual / Powertrain / Transmission/Transaxle / Input Shaft Seal Replacement - Right Automatic Transmission Unit

Input Shaft Seal Replacement - Right Automatic Transmission Unit

Input Shaft Seal Replacement - Right

Callout

Component Name

Transfer Case Input Shaft Seal – Right

Caution:Do not use a screwdriver or punch to remove the seal. Using ascrewdriver or punch to remove the seal may damage the aluminumhousing sealing surface.

Special ToolsDT-48074 Input and Output Shaft Seal InstallerJ-8092 Driver HandleDT-26941/KM-J-26941 Bushing and Bearing Remover – 3–4-inDT-45124 Removal Bridge

For equivalent regional tools, refer toSpecial Tools.

Input Shaft Seal Replacement - Left (RPO MHC) Automatic Transmission Unit

Input Shaft Seal Replacement - LeftCalloutComponent Name1Transfer Case Input Shaft Seal – LeftCaution:Do not use a screwdriver or punch to remove or install theseal. Using a screwdriver or punch to ...

Input Shaft Support Replacement (Gen 2) Automatic Transmission Unit

Input Shaft Support ReplacementCalloutComponent Name13-5 Reverse and 4-5-6 Clutch Fluid Seals-(Qty:-3)Note:Discard the fluid seals. They are not reusable.Refer to3-5-Reverse and 4-5-6 Clutch Fluid Sea ...

Other materials:

Front Lower Control Arm Bushing Replacement (Front Bushing) Control Arms Lower Control Arm
Tools Required J–44971 -Control Arm Bushing Remover/InstallerFor regional equivalent tools, refer toSpecial Tools.Removal ProcedureRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.Remove the tire and wheel assembly. Refer toTire and Wheel Removal and Installation.Remove the l ...