1 | Hood Primary and Secondary Latch Bolt (Qty:-2) Caution:Refer toFastener Caution. ProcedureMark location of hood latch to avoid the need to realign after installation.Insert long-handled trim tool into latch opening under plastic panel to disconnectelectrical connector retainer.Reach behind and under the radiator support bar to disconnect the electrical connector.Remove the 2 latch bolts.Tighten25-Y (18-lb-ft) |
2 | Hood Primary and Secondary Latch Procedure Pull the hood latch out and disconnect the hood release cable. |
Valve Rocker Arm Installation - Left Side Valvetrain Valve Actuating Assembly Rocker Arms
Apply a liberal amount of lubricant to the pivotpocket-(1), roller-(2) and valveslot-(3) areas of the camshaft followers. Refer toAdhesives, Fluids, Lubricants, and Sealersfor recommendedlubricant.Note:The follower must be positioned squarely on the valve tip sothat the full width of the roller will ...