1 | Hood Primary and Secondary Latch Bolt (Qty:-2) Caution:Refer toFastener Caution. ProcedureMark location of hood latch to avoid need to realign after installation.Reach under the plastic panel with appropriate tool to disconnect the electrical connectorretainer.Reach under the radiator support bar to disconnect the electrical connector.Remove the 2 latch bolts.Tighten25-Y (18-lb-ft) |
2 | Hood Primary and Secondary Latch Procedure Pull the hood latch out and disconnect the hood release cable. |
Washer Fluid
What to Use
When windshield washer fluid is
needed, be sure to read the
manufacturer's instructions before
use. If operating the vehicle in an
area where the temperature may fall
below freezing, use a fluid that has
sufficient protection against
freezing.
Adding Washer Fluid
Open t ...