Chevrolet Equinox Service Manual: Hood Front Molding Replacement (Terrain) Hood Assembly

Chevrolet Equinox Service Manual / Body / Doors and Enclosures / Hood Front Molding Replacement (Terrain) Hood Assembly

Hood Front Molding Replacement (Terrain) Hood Assembly

Hood Front Molding Replacement

Callout

Component Name

Preliminary Procedure Open and suitably support the hood assembly.
1	Hood Front Molding Nut (Qty-:2) Caution:Refer toFastener Caution. Tighten 4.7-Y(40-lb-in)
2	Hood Front Molding Retainer Clip (Qty-:11) ProcedureEnsure all of the foam gaskets are in place at each retainerclip prior to installing the hood molding to the hoodassembly.Use a clean dry cotton towel and the palm of the hand tosecure the retainer clips into the hood assembly.Begin in the center of the molding working outward to bothends of the hood front molding.
3	Hood Front Molding

Fuel Tank Filler Door Replacement (Terrain) Doors

Fuel Tank Filler Door ReplacementCalloutComponent Name1Fuel Tank Filler DoorProcedurePosition the fuel tank filler door to the full open position.Using light outward sliding pressure on the filler doo ...

Side Door Sill Trim Plate Package Installation Doors

Installation Instructions Part Number23169367Kit ContentsQtyDescription1Left Front Side Door Sill Trim Plate Assembly1Right Front Side Door Sill Trim Plate Assembly8Tie Straps1Wire Harness1Installatio ...

Other materials:

Brake Pad Inspection Disc Brakes Brake Pads
Warning:Refer toBrake Dust Warning.Inspect the disc brake pads at regular intervals, or wheneverthe tire and wheel assemblies are removed from the vehicle.If replacement is necessary, always replace disc brake padsin axle sets.Inspect both edges of the disc brake pad frictionsurfaces-(3). The highes ...