Preliminary Procedure Raise and support the vehicle. Refer toLifting and Jacking the Vehicle. | |
1 | Heated Oxygen Sensor Caution:Refer toHeated Oxygen and Oxygen Sensor Caution. Caution:Refer toFastener Caution. Tip:A special anti-seize compound is used in the HO2S threads. The compound consists ofliquid graphite and glass beads. The graphite tends to burn away, but the glass beadsremain, making the sensor easier to remove. New, or service replacement sensors alreadyhave the compound applied to the threads. If the sensor is removed from an exhaustcomponent and if for any reason the sensor is to be reinstalled, the threadsmust have anti-seize compound applied before reinstallation. ProcedureDisconnect the heated oxygen sensor harness connector.If reinstalling the old sensor, coat the threads with anti-seize compound. Refer toAdhesives, Fluids, Lubricants, and Sealers.Tighten42-Y (31-lb-in) |
Intake Camshaft and Valve Lifter Replacement Valvetrain Camshaft
Removal ProcedureRemove the intake camshaft position actuator. ReferCamshaft Position Intake Actuator Replacement.Remove the intakecamshaft position actuator solenoid valve bolt-(1) and valve-(2).Remove the rear cylinderhead cover plate-(1).Remove the intakecamshaft bearing rear cap bolts and cap-(2 ...