Preliminary ProcedureOpen the hood.Remove the front bumper fascia. Refer toFront Bumper Fascia Replacement. | |
1 | Headlamp Mounting Bolt-/-Screw (Qty:-4) Caution:Refer toFastener Caution. Tip:One screw is located at the front lower edge of the front fender outer panel at thebottom edge of the headlamp. Tighten4-Y (56-lb-in) |
2 | Headlamp Ball Socket Locator Pin ProcedurePull from the bottom of the headlamp forward in order to release the headlamp locatorpin from the front outer corner of the body rail.Disconnect the forward lamp harness electrical connector on the headlamp being serviced. |
3 | Headlamp Assembly Procedure Check and adjust the front headlamp aim after the headlamp have been reinstalled.Refer toHeadlamp Aiming. |
Low and Reverse Clutch and 1-2-3-4 Clutch Plate Removal Automatic Transmission Unit Automatic Clutches
Low and Reverse Clutch and 1-2-3-4 Clutch Plate RemovalCalloutComponent Name1Low and Reverse Clutch Retainer Ring2Low and Reverse Clutch Assembly31–2–3–4 Clutch (w/Friction Material) Plate Assembly (Qty: 2)41–2–3–4 Clutch Plate (Qty: 2)51–2–3–4 Clutch (Waved) Plate61–2–3–4 Cl ...