Chevrolet Equinox Owners Manual: Headlamp High/Low-Beam Changer

Chevrolet Equinox Owners Manual / Lighting / Exterior Lighting / Headlamp High/Low-Beam Changer

Push the turn signal lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release.

Headlamp High/Low-Beam Changer

This indicator light turns on in the instrument cluster when the high-beam headlamps are on.

Exterior Lamp Controls

The exterior lamp control is on the instrument panel to the left of the steering column. There are four positions. : Turns the exterior lamps off and deactivates the AUTO mode. Turn ag ...

Flash-to-Pass

The flash-to-pass feature works with the low beams or Daytime Running Lamps (DRL) on or off. To flash the high beams, pull the turn signal lever toward you momentarily and then release it. ...

Other materials:

Multimedia Player Interface Module Programming and Setup Entertainment Audio-Visual
Special ToolsEL-49642 SPS Programming Support ToolNote:DO NOT program a control module unless directed to by a service procedure or a servicebulletin. If the ECU is not properly configured with the correct calibration software,the ECU will not control all of the vehicle features properly.Ensure the ...