Chevrolet Equinox Service Manual: Generator Replacement (LFX) Starting System
Removal Procedure
Disconnect the negative battery cable. Refer toBattery Negative Cable Disconnection and Connection.Reposition the positive battery cable boot at the generatorterminal.Disconnect the engine harness electricalconnector-(1) from the generator.Remove the positive battery cable nut-(2) at thegenerator.Remove the positive battery cable terminal-(3)from the generator.Remove the drive belt. Refer toDrive Belt Replacement.
Remove the idler pulley bolt-(1) and idlerpulley-(2). Refer toDrive Belt Idler Pulley Replacement.Remove the generator bolts-(3).
Note:When removing the generator from the vehicle, it may benecessary to maneuver the generator to remove it from thevehicle.
Remove the generator(4).Installation Procedure
Position the generator (4) to the engine.Loosely install the generator bolts (3).Install the idler pulley. Refer toDrive Belt Idler Pulley Replacement.
Caution:Refer toFastener Caution.
Tighten the generator bolts to50-Y(37-lb-ft).
Install the drive belt. Refer toDrive Belt Replacement.Connect the engine harness electricalconnector-(1) to the generator.Install the positive battery cable terminal-(3) tothe generator.Install the positive battery cable nut-(2) at thegenerator and tighten to20-Y(15-lb-ft).Position the positive battery cable boot at the generatorterminal.Connect the negative battery cable. Refer toBattery Negative Cable Disconnection and Connection.
Starter Replacement (LEA) Starting System Starter
Removal ProcedureDisconnect the negative battery cable. Refer toBattery Negative Cable Disconnection and Connection.Remove the power vacuum brake booster pump. Refer toPower Brake Booster Pump Replace ...
Coolant Heater Replacement (LEA) Engine Cooling
Removal ProcedureIf equipped with AWD, remove the exhaust manifold. Refer toExhaust Manifold Replacement.Disconnect the coolant heater cord-(1).Remove the coolant heater bolt.Remove the coolant heater ...
Other materials:
Radiator Outlet Hose Replacement (LEA) Engine Cooling Radiator
Special ToolsJ 38185Hose Clamp PliersRemoval ProcedureDrain the cooling system. Refer toCooling System Draining and Filling.Raise and support the vehicle. Refer toLifting and Jacking the Vehicle.Disengage tension on the radiator outlet hoseclamp-(1) at the radiator usingJ 38185Hose Clamp Pliers.Remo ...
