Chevrolet Equinox Service Manual: General Description

Chevrolet Equinox Service Manual / Chassis / Suspension / General Description

The rear suspension system on this vehicle is of theindependent link type. The rear suspension system performs thefollowing functions:

Maintains the relationship of the rear axle to thebodyControls the torque reaction on acceleration andbraking

The rear coil springs are retained between the spring seat inthe lower control arm. Rubber insulators isolate the coil spring atboth top and bottom.

The suspension system consists of the followingcomponents:

Support assemblyCoil springsStabilizer shaft, insulators, and stabilizer linksToe linkUpper control armLower control armTrailing armKnucklesWheel bearing/hubShock absorbers

General Description

The front suspension has 2 primary purposes:Isolate the driver from irregularities in the roadsurface.Define the ride and handling characteristics of thevehicle.The front suspension absorbs the impact ...

Front Lower Control Arm Bushing Replacement (Front Bushing) Control Arms Lower Control Arm

Tools Required J–44971 -Control Arm Bushing Remover/InstallerFor regional equivalent tools, refer toSpecial Tools.Removal ProcedureRaise and support the vehicle. Refer toLifting and Jacking the Vehi ...

Other materials:

Crankshaft Rear Oil Seal Replacement Engine Block Seals and Gaskets
Special ToolsEN-42067Rear Main Seal InstallerFor equivalent regional tools, refer toSpecial Tools.Removal ProcedureRemove the flywheel. Refer toEngine Flywheel ReplacementNote:Do not damage the outside diameter of the crankshaft orchamber with any tool.Use a suitable tool to remove the crankshaft re ...