Special Tools
CH-48482 Fuel Tank Sender Wrench
For equivalent region tools, refer toSpecial Tools.
Removal ProcedureWarning:Refer toGasoline/Gasoline Vapors Warning.
Remove the fuel tank. Refer toFuel Tank Replacement.Disconnect the electrical connector-(1).Disconnect the evaporative emission line-(2). Refer toPlastic Collar Quick Connect Fitting Service.
Using the CH-48482 wrench, remove the cam lock ring-(1)-by turning counterclockwise.
Partially raise the secondary fuel pump module and disconnect the crossover tube-(1)-bysqueezing the plastic retaining tabs-(2).
Remove the secondary fuel tank module-(1)-and the O-ring-(2).Installation Procedure
Partially install the secondary fuel pump module and connect the crossover tube-(1)-bysliding into position.
Install a NEW O-ring-(2)-and the secondary fuel tank module-(1).
Using the CH-48482 wrench, install the cam lock ring-(1)-by turning clockwise.
Connect the electrical connector-(1).Connect the evaporative emission line-(2). Refer toPlastic Collar Quick Connect Fitting Service.Install the fuel tank. Refer toFuel Tank Replacement.
Event Data Recorders
This vehicle is equipped with an
event data recorder (EDR). The
main purpose of an EDR is to
record, in certain crash or near
crash-like situations, such as an air
bag deployment or hitting a road
obstacle, data that will assist in
understanding how a vehicle's
systems performed. The EDR is
...