Chevrolet Equinox Service Manual: Fuel Pump Removal Fuel System Fuel Pumps
Remove the fuel rail noise shield-(1).
Remove the fuel rail wiring connectors from the fuel feedpipe bracket.Remove the fuel feed pipe bolts-(1).Remove and discard the fuel feed pipe-(2).
Remove and discard the high pressure LH to RH fuel railcrossover pipe-(1).
Remove and discard high pressure fuel pumpbolts-(1).Remove the high pressure fuel pump-(2).Remove the valve lifter follower-(3).Remove and discard the high pressure fuel pumpgasket-(4).Remove and discard the high pressure fuel pumpO-ring-(5).
Engine Block Disassemble Engine Block
Remove the engine front cover studs-(1).Remove the block heater cartridge, if equipped.Remove the right knock sensor bolt.Remove the right knock sensor.Remove the left knock sensor bolt.Remove the lef ...
Camshaft Cover Removal - Left Side Valvetrain Camshaft
Remove the ignition coil bolts.Remove the ignition coils.Remove the left camshaft cover bolts.Remove and discard the camshaft cover grommets and camshaftcover bolts if they are serviced with the gromm ...
Other materials:
Front Differential Drive Pinion Gear Bearing Cup and Lubricant Dam Replacement Automatic Transmission Unit
Table 1: RemovalTable 2: InstallationRemovalRemovalCalloutComponent Name1Front Differential Drive Pinion Gear Bearing CupCaution:Failure to apply the lubricant will cause damage to the boltand nut threads.Note:Tighten DT-45094 cup remover until it fits snugly on the bearing cup.Adjust DT 45124 remov ...