
| Preliminary ProceduresRelieve the fuel system pressure. Refer toFuel Pressure Relief.Remove the intake manifold cover. Refer toIntake Manifold Cover Replacement.Raise and support the vehicle. Refer toLifting and Jacking the Vehicle.Disconnect the quick connectors. Refer toMetal Collar Quick Connect Fitting ServiceandPlastic Collar Quick Connect Fitting Service. | |
1 | Fuel Feed Line Procedure Disengage the line from the plastic retainers. |
Fuel Injector and Fuel Rail Replacement Engine Control
Fuel Pipe Shield Replacement Engine ControlTransfer Case Disassemble 4WD Transfer Case
Table 1: Housing O-Ring, Vent Assembly, Drain and Fill Plug RemovalTable 2: Intermediate Drive Shaft RemovalTable 3: Rear Output Shaft Housing RemovalTable 4: Right Transfer Case, Input and Output Drive Shaft RemovalTable 5: Rear Output Shaft Housing DisassemblyTable 6: Intermediate Drive Shaft Disa ...