Chevrolet Equinox Service Manual: Front Wheel Bearing and Hub Replacement Wheel Hub

Chevrolet Equinox Service Manual / Chassis / Suspension / Front Wheel Bearing and Hub Replacement Wheel Hub

Front Wheel Bearing and Hub Replacement Wheel Hub

Front Wheel Bearing and Hub Replacement

Callout

Component Name

Preliminary ProceduresRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.Remove the tire and wheel assembly. Refer toTire and Wheel Removal and Installation.Remove the front wheel drive shaft nut. Refer toFront Wheel Drive Shaft Replacement.Remove the front brake rotor. Refer toFront Brake Rotor Replacement.Remove the front wheel speed sensor. Refer toFront Wheel Speed Sensor Replacement.

Front Wheel Bearing and Hub Assembly Bolt (Qty:-3)

Caution:Refer toFastener Caution.

ProcedureUse the proper cleaner on the front wheel bearing and hub assembly bolt threads.Apply new threadlocker on 2/3 of the length of all front wheel bearing and hub assemblybolts. Refer toAdhesives, Fluids, Lubricants, and Sealers.

Note:Allow the new threadlocker to set for-10-minutes before using.

Tighten

100-Y (74-lb-ft)

Front Wheel Bearing and Hub Assembly

Note:If removing the front wheel bearing and hub assembly to service other components,support the front wheel drive shaft with mechanic’s wire.

Front Lower Control Arm Bracket Brace Replacement Control Arms Lower Control Arm

Front Lower Control Arm Bracket Brace ReplacementCalloutComponent NameWarning:Refer toExhaust Service Warning.Preliminary ProcedureRaise and support the vehicle. Refer toLifting and Jacking the Vehicl ...

Hood Strut Replacement Strut Assembly

Hood Strut ReplacementCalloutComponent Name1Hood Strut AssemblyWarning:When a hood hold open device is being removed or installed,provide alternate support to avoid the possibility of damage to theveh ...

Other materials:

Fastener Tightening Specifications - Body Exterior
Fastener Tightening SpecificationsApplicationSpecificationMetricEnglishFront Fog Lamp Bezel Screw2.5-Y22-lb-inHood Front Molding Nut4.7-Y40-lb-inLiftgate Applique Nut6-Y53-lb-inLiftgate Center Applique Assembly Nuts6-Y53-lb-inLiftgate Side Upper Applique Screw2.5-Y22-lb-inRadiator Lower Outer Grille ...