Chevrolet Equinox Service Manual: Front Side Door Window Upper Reveal Molding Replacement Doors

Chevrolet Equinox Service Manual / Body / Doors and Enclosures / Front Side Door Window Upper Reveal Molding Replacement Doors

Front Side Door Window Upper Reveal Molding Replacement Doors

Front Side Door Window Upper Reveal Molding Replacement

Callout

Component Name

Preliminary ProceduresRemove the front side door trim panel. Refer toFront Side Door Trim Panel Replacement.Remove the front side door garnish molding. Refer toFront Side Door Garnish Molding Replacement.Remove the outside rearview mirror. Refer toOutside Rearview Mirror Replacement.

Front Side Door Window Upper Reveal Molding Fastener(Qty:-5)

Warning:Refer toGlass and Sheet Metal Handling Warning.

ProcedureOne clip is located on the inner upper door frame.Lower the window to the fully down position.Apply masking tape to the applique to protect thefinish.Pull the front side door window weatherstrip from the doorframe to expose the rivets.When drilling cover/protect the interior trim and door fromthe metal shavings.Use a suitable tool, drill out the rivets from the doorframe.

Front Side Door Window Upper Reveal Molding

ProcedureUse a suitable tool, install the rivets in the front sidedoor frame.Start at the rear of the front door edge, fully seat themolding before installing the rivets.Inspect the operation of the window before installing thedoor trim panel.

Front Side Door Window Switch Replacement Doors

Front Side Door Window Switch ReplacementCalloutComponent NamePreliminary ProcedureRemove the front side door accessory switch mount plate.Refer toFront Side Door Accessory Switch Mount Plate Replacem ...

Front Side Door Window Weatherstrip Replacement Doors

Front Side Door Window Weatherstrip ReplacementCalloutComponent NamePreliminary ProcedureRemove the front side door window. Refer toFront Side Door Window Replacement.1Front Side Door Window Weatherst ...

Other materials:

Radiator Cleaning Engine Cooling Radiator
Warning:NEVER spray water on a hot heat exchanger. The resultingsteam could cause personal injury.Caution:The heat exchanger fins are necessary for good heat transfer.Do not brush the fins. This may cause damage to the fins, reducingheat transfer.Note:Remove bugs, leaves, dirt and other debris by bl ...