Preliminary ProceduresRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.Remove either the left front or right front wheelhouse liner.Refer toFront Wheelhouse Liner Replacement.Disconnect the fog lamp bulb socket electricalconnector. | |
1 | Front Fog Lamp Adjuster Screw Tip:Remove the adjuster screw in order to access the lockingring. |
2 | Front Fog Lamp Screw (Qty:-2) Caution:Refer toFastener Caution. Tighten2-Y(18-lb-in) |
3 | Front Fog Lamp Assembly Procedure Remove the lamp projector assembly from the fog lamp lockingring. Tip:The fog lamp is replaced as an assembly. |
4 | Front Fog Lamp Locking Ring ProcedureRelease the locking ring from the tabs on the front bumperfascia.Replace the fog lamp as an assembly.Aim the fog lamps after replacement. Refer toFog Lamp Aiming. |
#PI0574A: Missing OnStar Owner Kit Integration in Vehicle Owner Manual - (May 28, 2013)
Subject:Missing OnStar® Owner Kit Integration in Vehicle Owner ManualModels: 2012-2014 GM Passenger Cars and Light Duty Trucks This bulletin is being revised to include the 2013-2014 model year vehicles, updatethe covered models and the Recommendation/Instructions section. Please discard PI057 ...