Preliminary Procedure Remove the front bumper energy absorber. Refer toFront Bumper Energy Absorber Replacement. | |
1 | Front Bumper Lower Fascia Screw Caution:Refer toFastener Caution. Tighten7-Y(62-lb-in) |
2 | Front Bumper Lower Fascia ProcedureCarefully push a small nylon wedge between the fascia and thelower fascia. Insert a small flat-bladed tool into the fascia slotand depress the tabs one at a time and pull on the fascia at thesame time to gradually remove the lower fascia from thefascia.Transfer parts as needed. |
3-5-Reverse and 4-5-6 Clutch Housing Disassemble Automatic Transmission Unit
Table 1: Reluctor Wheel and Piston RemovalTable 2: Clutch Plate RemovalTable 3: 4–5–6 Clutch Hub RemovalTable 4: 4–5–6 Clutch Piston RemovalReluctor Wheel and Piston RemovalReluctor Wheel and Piston RemovalCalloutComponent Name1A/Trans Input Shaft Speed Sensor Reluctor Ring Retaining RingCau ...