Figure 1: | Torque Converter and Differential Housing - Case Side |
Figure 2: | Fluid Pump Body - Fluid Pump Cover Side |
Figure 3: | Fluid Pump Cover - Fluid Pump Body Side |
Figure 4: | Case - Torque Converter and Differential Housing Side |
Figure 5: | Case - Control Valve Body Side |
Figure 6: | Control Valve Body Spacer Plate Assembly - Case Side |
Figure 7: | Control Valve Body - Case Side |
Figure 8: | Control Valve Body - Channel Plate Side |
Figure 9: | Channel Plate to Valve Body Spacer Plate Assembly - Channel Plate Side |
Figure 10: | Channel Plate - Control Valve Body Side |
Figure 11: | Channel Plate - Control Solenoid (w/Body and TCM) Valve Assembly Side |
Figure 12: | Control Solenoid (w/Body and TCM) Valve Assembly - Channel Plate Side |
Lower Control Arm Ball Joint Replacement Suspension Ball Joints
Removal ProcedureRemove the lower control arm. Refer toLower Control Arm Replacement.Place the lower control arm in a vise or suitable holding device.Remove the ball joint rivets using the following procedure.Drill through the rivets using an 8-mm (5/16-in) drill bit.Enlarge the hole using a 12-mm ( ...