Chevrolet Equinox Service Manual: Fastener Tightening Specifications - Transmission Unit Automatic Transmission Unit
Transfer Case Bracket-to-Engine Bolt– Hole 4 | 50-Y | 37-lb-ft |
Transfer Case Bracket-to-Engine Bolts– Holes 1, 2, and 3 | 23-Y | 17-lb-ft |
Transfer Case Bracket-to-Transfer CaseBolts – Holes 5 and 6 | 50-Y | 37-lb-ft |
Transfer Case Drain Plug | 39-Y | 29-lb-ft |
Transfer Case Fill Plug | 39-Y | 29-lb-ft |
Transfer Case Half Bolts (Qty: 12) | 29-Y | 21-lb-ft |
Transfer Case Heat Shield Bolts (Qty: 3) | 11-Y | 97-lb-in |
Transfer Case Rear Output Drive Gear Nut (Qty: 1) | 235-Y | 173-lb-ft |
Transfer Case Rear Output Drive Shaft Housing Bolts (Qty:6) | 29-Y | 21-lb-ft |
Fastener Tightening Specifications (On Vehicle) Automatic Transmission Unit
Fastener Tightening SpecificationsApplicationSpecificationMetricEnglishControl Valve Body Bolts12-Y106-lb-inControl Valve Body Cover Bolts12-Y106-lb-inControl Valve Body Cover Studs12-Y106-lb-inDrain ...
Fluid Passages Automatic Transmission Unit
Figure 1: Control Solenoid (w/Body and TCM) Valve AssemblyFigure 2: Control Valve Channel Upper Plate AssemblyFigure 3: Control Valve Channel Plate - Upper Plate SideFigure 4: Control Valve Channel Pl ...
Other materials:
Input Speed Sensor Replacement Automatic Transmission Unit
Removal ProcedureRemove the control solenoid valve and transmission control module assembly. RefertoControl Solenoid Valve and Transmission Control Module Assembly Replacement.Disconnect the input speed sensor electrical connector-(1).Remove the input speed sensor bolt-(2) M6 x 23.Remove the input s ...
