Chevrolet Equinox Service Manual: Fastener Tightening Specifications - Propeller Shaft Assembly Driveshafts Propeller Shaft Assembly

Chevrolet Equinox Service Manual / Powertrain / Driveline / Fastener Tightening Specifications - Propeller Shaft Assembly Driveshafts Propeller Shaft Assembly

Fastener Tightening Specifications

Application

Specification

Metric

English

Center Bearing-to-Vehicle Underbody Bolts	25-Y	19-lb-ft
Propeller Shaft-to-Rear Differential Flange Bolts	50-Y	37-lb-ft
Propeller Shaft-to-Transfer Case Flange Bolts	35-Y	25-lb-ft

Drive Pinion Flange/Yoke and/or Oil Seal Replacement Axles Rear

Drive Pinion Flange/Yoke and/or Oil Seal ReplacementCalloutComponent NamePreliminary ProceduresRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.Remove the differential clutch dru ...

Fastener Tightening Specifications - Rear Axles Rear

Fastener Tightening SpecificationsApplicationSpecificationMetricEnglishClutch Drum Cover Bolts29-Y21-lb-ftDifferential Clutch Control Module Screws15-Y11-lb-ftDifferential Drain Plug39-Y29-lb-ftDiffer ...

Other materials:

Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment Wheels
Position and lock the steering wheel with the vehicle with the wheels in the straightforward position.Loosen both inner tie rod jam nuts.Note:The inner tie rod must rotate freely from the boot seal surface. Do not allow theboot to rotate.Loosen the inner tie rod seal to boot surface.Use a wrench on ...