A/Trans Auxiliary Fluid Pump Outlet Bolt-(HybridModels) | 350 | 4 | — | 22-Y | 16-lb-ft |
A/Trans Auxiliary Fluid Pump Bolt-(HybridModels) | 355 | 1 | — | 22-Y | 16-lb-ft |
A/Trans Auxiliary Fluid Pump (Pump to Motor)Bolt-(Hybrid Models) | 370 | 4 | — | 10–12-Y | 89–106-lb-in |
A/Trans Fluid Pump Bolt to Converter Housing | |||||
First Pass | 200 | 7 – 6T30, 8 – 6T40/45/50 | M8x33 | 10-Y | 89-lb-in |
Final Pass | 200 | M8x33 | 45° | ||
A/Trans Fluid Pump Cover Bolt | 302 | 3 – 6T30, 23 – 6T40/45/50 | M6x25 | 12-Y | 106-lb-in |
A/Trans Fluid Pump Cover Bolt | 320 | 20 – 6T30, | M6x21.5 | 12-Y | 106-lb-in |
Control Solenoid Valve Assembly (w/TCM and Body) to CaseBolt | 4 | 12 | M6x97 | 10-Y | 89-lb-in |
Control Solenoid Valve Assembly (w/TCM and Body) to CaseBolt | 6 | 3 | M5x40.5 | 7-Y | 62-lb-in |
Control Valve Body Assembly (Complete) Bolt | 400 | 1 | M5x40.5 | 7-Y | 62-lb-in |
Control Valve Body to Case Bolt | 9 | 2 | M6x53 | 11-Y | 97-lb-in |
Control Valve Body to Case Bolt | 10 | 9 | M6x60 | 11-Y | 97-lb-in |
Control Valve Body Cover Bolt | 1 | 13 | M6x30 | 12-Y | 106-lb-in |
Drain Plug | 64 | 1 | 1/8”–27-NPTF | 12-Y | 106-lb-in |
Fluid Level Hole Plug | 63 | 1 | 1/8”–27-NPTF | 12-Y | 106-lb-in |
Fluid Pressure Test Hole Plug | 51 | 1 | 1/8”–27-NPTF | 12-Y | 106-lb-in |
Front Differential Carrier BaffleBolt-–-Converter Housing | 204 | 2 | M6x25 | 12-Y | 106-lb-in |
Front Differential Carrier BaffleBolt-–-Case | 61 | 2 | M6x18.5 – 6T30, M6x16 – 6T40/45/50 | 12-Y | 106-lb-in |
Input Shaft Support Bolt | 57 | 3 | M6x50 | 12-Y | 106-lb-in |
Input Speed Sensor Bolt | 21 | 1 | M6x23 | 9-Y | 80-lb-in |
Manual Shift Detent Spring | 17 | 1 | M6x16 | 12-Y | 106-lb-in |
Output Speed Sensor Bolt | 15 | 1 | M6x18 | 9-Y | 80-lb-in |
Torque Converter and Differential Housing Bolt | |||||
First Pass | 27 | 14 – 6T30, 15 – 6T40/45/50 | M8x30 | 10-Y | 89-lb-in |
Final Pass | 27 | M8x30 | 50° | ||
*Reference number refers to the component callout number inDisassembled Views |
SIR Identification Views Secondary
The SIR Identification Views shown below illustrate theapproximate location of all SIR components available for thevehicle. This will assist in determining the appropriate SIRDisabling and Enabling for a given service procedure. Refer toSIR Disabling and Enabling.(1)Right Front ImpactSensor—Locate ...