Chevrolet Equinox manuals

Chevrolet Equinox Service Manual: Exhaust Manifold Installation (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Chevrolet Equinox Service Manual / Powertrain / Engine / Exhaust Manifold Installation (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Exhaust Manifold Installation (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Caution:Refer toFastener Caution.

Install new exhaust manifold studs and tighten to 10-Y (89-lb-in).

Exhaust Manifold Installation (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Install the secondary air injection pipe assembly-(1).Install the secondary air injection pipe assembly bolts-(2) and tighten to 10-Y-(89-lb-in).

Exhaust Manifold Installation (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Install the exhaust manifold gasket-(3).Install the exhaust manifold-(2) to the cylinder head.Install NEW exhaust manifold to cylinder head retaining nuts-(1) finger tight.

Exhaust Manifold Installation (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Tighten the NEW exhaust manifold to cylinder head retaining nuts two passes in sequence:Tighten first pass in sequence to 14-Y (124-lb-in).Tighten final pass in sequence to 14-Y (124-lb-in).

Exhaust Manifold Installation (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Install the block heater-(1). Tighten the bolt to 10-Y (89-lb-in).

Exhaust Manifold Installation (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Install the exhaust manifold heat shield-(1).Install the exhaust manifold heat shield bolts and tighten to 9-Y (80-lb-in).

Exhaust Manifold Installation (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Coat the threads of the oxygen sensor-(1) with antiseize. Refer toAdhesives, Fluids, Lubricants, and Sealers.Install the oxygen sensor and tighten to 42-Y (31-lb-ft).

Exhaust Manifold Installation (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Install the secondary air injection studs-(3-and-4) and tighten to 10-Y(89-lb-in).Install the secondary air injection valve assembly-(1) with a NEW gasket-(2).

Exhaust Manifold Installation (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Install the secondary air injection bolts-(2-and-3) and nuts-(1).Tighten the secondary air injection assembly to cylinder head bolts-(3) to 22-Y(16-lb-ft).Tighten the secondary air injection assembly to pipe assembly bolts-(2) to 10-Y(89-lb-in).Tighten the secondary air injection assembly nuts-(1) to 22-Y(16-lb-ft).

Intake Manifold Removal Intake and Forced Induction Intake Manifold
Caution:Never attempt to remove the intake manifold from a hotengine, allow the engine to cool to ambient temperature. The intakemanifold can be damaged if it is removed when the engine ishot.Remove t ...

Oil Filter Adapter Assemble Engine Lubrication Oil Filter
Caution:Refer toFastener Caution.Install the oil filter fitting and tighten to50-Y(37-lb-ft).Install the oil pressure sender and tighten to20-Y(15-lb-ft). ...

Other materials:

Secondary Air Injection Check Valve Installation - Bank 2 Emissions Air Injection
Install the NEW secondary air injection-(SAI)check valve gasket-(1).Install the SAI check valve-(2).Caution:Refer toFastener Caution.Install the SAI check valve bolts-(3) and tightento25-Y(18-lb-ft). ...

© 2017-2024 Copyright www.cequinox.com