Chevrolet Equinox Service Manual: Engine Oil and Oil Filter Replacement Engine Lubrication Oil Filter
Removal ProcedureRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.Place a drain pan under the oil pan drain plug.Remove the oil pan drain plug. Allow the oil to draincompletely.
Caution:Refer toFastener Caution.
Install the oil pan drain plug and tighten to25-Y(18-lb-ft).
Warning:Refer toHot Exhaust System Warning.
Place the drain pan under the oilfilter-(1).Remove the oil filter. Allow the oil to draincompletely.Installation Procedure
Lubricate the NEW oil filter gasket with clean engineoil.Tighten the oil filter-(1) to25-Y(18-lb-ft).Lower the vehicle.Refill the engine oil. Refer toApproximate Fluid Capacities.Start the engine and inspect for leaks.
Evaporative Emission Canister Replacement Emissions Evap Evap Canister
Removal ProcedureNote:The EVAP emissions canister is located under the center ofthe vehicle. It has 3-EVAP line connections:The EVAP fresh airThe EVAP ventThe EVAP purgeRaise and support the vehicle. ...
Intake Manifold Replacement Intake and Forced Induction Intake Manifold
Removal ProcedureRecover the A/C system. Refer toRefrigerant Recovery and Recharging.Relieve the fuel system pressure. Refer toFuel Pressure Relief.Remove the air cleaner outlet duct. Refer toAir Clea ...
Other materials:
#03-06-03-004J: Warranty Code Generated By EL-50313 Midtronics GR8 Battery Tester/Charger Required for Claim Processing On Labor Operation 4041510 and...
Subject:Warranty Code Generated By EL-50313 Midtronics GR8 Battery Tester/Charger Requiredfor Claim Processing On Labor Operation 4041510 and 250 Mile/400 Km Labor OperationRestriction (North America ONLY)Models: 2014 and Prior GM Cars and Light Duty TrucksAttention: This bulletin applies ONLY to ...
