Chevrolet Equinox Service Manual: Disc Brake Component Specifications Disc Brakes

Chevrolet Equinox Service Manual / Chassis / Brakes / Disc Brake Component Specifications Disc Brakes

Disc Brake Component Specifications

Application

Specification

Metric

English

Brake Pads- Front and Rear
Minimun Thickness	2.0-mm	0.08-in
Front Disc Brake Rotor
Diameter	321.00-mm	12.64-in
Discard Thickness*	27.00-mm	1.06-in
Maximum Allowable Lateral Runout	0.06-mm	0.002-in
Maximum Allowable Scoring	1.60-mm	0.06-in
Maximum Allowable Thickness Variation	0.025-mm	0.001-in
Rear Disc Brake Rotor
Diameter	303.00-mm	11.93-in
Discard Thickness*	18.40-mm	0.72-in
Maximum Allowable Lateral Runout	0.06-mm	0.002-in
Maximum Allowable Scoring	1.60-mm	0.06-in
Maximum Allowable Thickness Variation	0.025-mm	0.001-in
*All disc brake rotors have a discard dimension cast intothem. Replace any rotor that does not meet this specification.After refinishing the brake rotor, measure the brake rotorthickness. Replace any brake rotor which exceeds the discardspecification.

Brake Pedal Position Sensor Learn Hydraulic Brakes Brake Pedal Assembly

Calibration CriteriaNote:Do not apply the brake pedal during the brake pedal position sensor calibration procedure.Any movement of the brake pedal during this procedure will cause the calibration proc ...

Brake Pedal Pushrod Inspection Hydraulic Brakes Brake Pedal Assembly

Disconnect the brake pedal pushrod-(1) from thebrake pedal.Inspect the brake pedal pushrod eyeletbushing-(2), if equipped, for cracks and/or excessivewear.Reposition the pedal pushrod boot-(3) toward ...

Other materials:

Park Brake and P (Park) Mechanism Check
Warning When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehic ...